05-09-2012, 01:56 PM
|
#2425
|
|
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM
Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
Yes I would say an inch would be good. you just need to get your air intake tube going south asap when it comes off the lip of the throttle body. The quicker it dives the better clearance you will have. Then you fab up something on the other end to turn it back into the filter tube. I used two 45 degree couples one on each end and trimmed them to get it to dive quicker. So maybe more like a 50to60 degree coupler would be ideal.
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
|
|