Quote:
Originally Posted by Tyler360
There are two gray wires, which one is it? Also, whats the best location to mount the light strips?
|
In your third pic, there are two nearly square holes about 10 or 12 inches apart. I used CCFL tubes so i zip tied them using those to holes and there are a couple different holes on the drivers side. I just went with what I thought was a safe place where they wouln't likely get damaged and would shine light evenly as well as be out of sight from the cabin. Don't be afraied to experiment. Zip ties are fairly cheap.
__________________
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "Holy shit, what a ride!"