Added a few more notes to the original post. You should be following the isntructions in the kit, the ones in this thread were posted as a guideline, you will find more details in the kit.
If you have any questions email us directly at
info@acscomposite.com, you can also email me you number and I'll talk you though it.
Quote:
Originally Posted by TRC-SS
Hey one question...installation is tomorrow night, i dont know if im missing something or just not getting it.
Is part of step 10 not listed...im just not seeing how the top port is secured to the hood.
step 11 indicates " a. Once the outer panel adhesive is cured you may turn the hood over and clean all surfaces to be covered with the inner panel."
All i see in step 10 is defining the edges with masking tape....then goes to step 11
Thanks Tim |