|
Finished the driver's door today. First I had to do the scariest part- cutting into the door trim. I used a serrated knife and a box cutter. There isn't a lot of material there and it is really soft. So I went in segments till the tweeter fit. Then I started snaking wires. The main connector has extra space after you remover the unneccesary orange lock. I make sure you don't cross your wires through the connector or it won't latch. Then I snaked it all through the extra grommet and threw a zip tie on there. As I said before, I can always go back and add my own wire hider to clean it up. Until I get everything hooked up and test it, I'll leave it as is.
|