|
This might help some of you trying to figure out what the psi should be with pulley swap:
The stock boost for any Magnacharger TVS 2300 Supercharger Kit installed upon any 2010 - 2012 Camaro 6.2L V8 with a 3.80" Magnacharger Pulley installed on it is only 6 psi at wide open throttle.
- 3.60" pulley: expect 2.0 psi. more boost over stock pulley -Total boost 8.0 psi
- 3.40" pulley: expect 4.0 psi. more boost over stock pulley -Total boost 10.0 psi
- 3.20" pulley: expect 6.0 psi. more boost over stock pulley -Total boost 12.0 psi
- 3.10" pulley: expect 7.0 psi. more boost over stock pulley -Total boost 13.0 psi
- 3.00" pulley: expect 8.0 psi. more boost over stock pulley -Total boost 14.0 psi
- 2.90" pulley: expect 9.0 psi. more boost over stock pulley -Total boost 15.0 psi
- 2.80" pulley: expect 10.0 psi. more boost over stock pulley -Total boost 16.0 psi
- 2.70" pulley: expect 11.0 psi. more boost over stock pulley -Total boost 17.0 psi
PLEASE NOTE: If running Long-Tube Headers, you will lose 2 PSI of Boost and to gain that back, choose a pulley 2 sizes smaller!
WARNING: The only way to install the 2.70" Pulley is to have the Jackshaft Housing machined down for it to fit properly. Some Jackshaft Housing Castings are made differently in sizes and do vary, as to what the smallest pulley you can use without maching. The smallest size we recommend is 2.80", without any machining performed on the jackshaft housing casting area.
|