Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - How To Hook Your Forced Induction LS3 Power

*SSE 4 2SS* · 06-23-2012, 08:59 PM

Ok, Necro thread apology... but...

There are a number of vendors I have purchased from or who's products I use or both...

Matt @ ECS, for the Weld Wheels,
Frank @ DSS for the Nine inch Kit...
Pfadt for some of the suspension components via Apex Chase
Amsoil, which is the only oil that goes in my motor...

I don't yet have a picture off the trailer, but here is a picture of my car sporting the Welds, Hoosiers, MH racemasters, and we were on the way to the track for my first ever launch of a car with slicks, skinnies, and anywhere near this much power... It was brutally hot and quite humid, so there were no blazing time, but I sure learned a lot...

I want to thank all of you for your help along the way, directly or indirectly...

As mentioned, First time, so be gentle...

Car on the trailer...

http://www.camaro5.com/forums/showpo...postcount=3751

My thoughts and write up if your interested...

http://www.camaro5.com/forums/showpo...postcount=3668

and the video of my first four launch attempts... Such the noob...

06-23-2012, 08:59 PM	#32
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,802	Ok, Necro thread apology... but... There are a number of vendors I have purchased from or who's products I use or both... Matt @ ECS, for the Weld Wheels, Frank @ DSS for the Nine inch Kit... Pfadt for some of the suspension components via Apex Chase Amsoil, which is the only oil that goes in my motor... I don't yet have a picture off the trailer, but here is a picture of my car sporting the Welds, Hoosiers, MH racemasters, and we were on the way to the track for my first ever launch of a car with slicks, skinnies, and anywhere near this much power... It was brutally hot and quite humid, so there were no blazing time, but I sure learned a lot... I want to thank all of you for your help along the way, directly or indirectly... As mentioned, First time, so be gentle... Car on the trailer... http://www.camaro5.com/forums/showpo...postcount=3751 My thoughts and write up if your interested... http://www.camaro5.com/forums/showpo...postcount=3668 and the video of my first four launch attempts... Such the noob... __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...