Your fuel pressure is defaulted to kpa units. When SCT works out all the bugs, you will be able to choose which unit you want, such as psi, Fahrenheit, etc. My sct with xxxxx.11 firmware displays my fuel pressure as 133 at idle. I need to multiply that by 3, as per the formula shown in list of pids. Then convert it to psi. http://www.csgnetwork.com/presskpapsicvt.html
or multiply kpa by .145 400*.145=58psi
__________________
GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock
|