[QUOTE=Sack Rat 2SS;5174075]
Quote:
Originally Posted by Envious
So, I guess I am not reading all these posts correctly! Will I have to drill any holes if i already have the rear spoiler on my RS? Or plug any?[/QUOT
If you are not an SS then you drill ALL holes. If you are an SS you need to fill three holes and drill three holes. The fill holes are two for attach bolts from old SS spoiler and one guide hole that aligns old spoiler. The new holes are two for attaching just outside of the stoplight and one to pull the wire into the decklid. Reffering to above post by 2SSRS, I removed the two plastic alignment pins from the ZL1 spoiler as they are not needed. Hope this helps. FYI, while I was filling the three old SS holes I also filled the two bowtie holes for a cleaner look.  |
Mr RS has a factory spoiler is it different then a SS spoiler?