View Single Post
Old 07-06-2012, 10:53 PM   #50
KMPrenger


 
KMPrenger's Avatar
 
Drives: 16 Camaro SS, 15 Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 13,967
Quote:
Originally Posted by butters View Post
Wouldn't you want bigger gears for more torque? I believe the A6 is 2.97?
All V6s except the 2LS have 3.27 gearing.

Quote:
Originally Posted by Yohan View Post
.........

So why only 278? Is because it was programmed from GM this way, shift points, etc., or the gearing is not as good?

.......
Actually 278 TQ is not too bad for this engine. Sure, 300 TQ would be nice, but look at many other potent V6s out there and you will find their TQ numbers are quite a bit lower than their HP figure. My numbers aren't exact, but the mustang V6 makes around 273TQ, and even the all mighty 370Z makes no more TQ than our car does. But both of these cars offer lower gearing and weigh less and so their straightline performance is better.

Look at the new Cadillac ATS with the LFX V6. It has the exact same 3.27 gearing, but weighs only about 3460 lbs compared to the Camaro V6 3750 lbs. The ATS is rated at 5.4 seconds 0 - 60 while the Camaro was rated 4 or 5 tenths of a second slower to 60 than that. Put lower gearing or add bolt ons to that ATS and suddenly you could have a V6 that will do the 0 - 60 in under 5 seconds.
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!)
KMPrenger is offline   Reply With Quote