Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Camaro007 · 05-27-2009, 11:34 PM

Car is a week old. Driving home tonight and I hear a grinding sound. Thought that I was dragging something. Pulled over and the front GFX point was touching the ground and pretty much grinded off with a big hole at the point? I read thru this thread and looked at the install directions. If I'm reading the instruction correctly it shows that the front fascia/bump needs to be removed

(Page 11- Disconnect the fascia wiring harness (1) from the vehicle
harness (2) on the RHS of the vehicle. Remove the fascia from the vehicle. )

to attached rivits to the front fascia to the front GFX. All i have is the side brackets and 3M tape on the side and one in front? Am i correct on this? I think the dealers might have skipped this part?

05-27-2009, 11:34 PM	#71
Camaro007 Drives: 2SS/RS Black Join Date: Mar 2009 Location: Long Island, NY Posts: 132 View My Garage	Happened to mine too. Car is a week old. Driving home tonight and I hear a grinding sound. Thought that I was dragging something. Pulled over and the front GFX point was touching the ground and pretty much grinded off with a big hole at the point? I read thru this thread and looked at the install directions. If I'm reading the instruction correctly it shows that the front fascia/bump needs to be removed (Page 11- Disconnect the fascia wiring harness (1) from the vehicle harness (2) on the RHS of the vehicle. Remove the fascia from the vehicle. ) to attached rivits to the front fascia to the front GFX. All i have is the side brackets and 3M tape on the side and one in front? Am i correct on this? I think the dealers might have skipped this part? __________________ 2SS/RS, Black on Black w/Painted GFX, Exhaust Diverters, & 21" wheels.