View Single Post
Old 05-29-2009, 06:32 PM   #47
2010 SS RS

2010 SS RS's Avatar
Drives: 2010 2SS/RS IBM Black Polished
Join Date: Feb 2009
Location: Colorado
Posts: 2,108
To answer some of the above questions. No I am not selling these. I posted this as a cost effective option that utilizes the already good quality tuned pipes the car comes with. The interior sound level does not really change much with the windows up unless you are in a tunnel or garage that is reflecting the sound back to you. The sound inside is prior to the removal of stock mufflers coming from the resonators anyway and this mod does not change any of that. But like someone said. If you want quiet this is not the mod for you. When you are on it, it will roar. But if you are mellow it stays pretty mellow with you. The length of video was limited because I had to email them to Hylton to post on You Tube. Not a computer geek and was kinda clueless. Look all I can say is you can have your pipe tech cut the pipe right before it goes into the muffler. Drop your mufflers down slightly and take a listen before completing your install. If you dont like just have him weld them back or install one of the high dollar kits. If you do like then proceed with the install of new straight pipe. Oh there was a queston about centering and the hangers. GM has a new hanger that is awesome on the camaro. It is a two hole hanger with a flat bar to keep wobble to a minimum. And yes they are but one component of a properly aligned system. The factory tips are another. To get the angles right make sure to take pics before and use them as a guide for placement of the final fit. Good luck
418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts
2010 SS RS is offline   Reply With Quote