Quote:
Originally Posted by slick rick
Is this harness so you can run the DRLs at the same time as your headlights?
If yes, then remove the torx screws towards the front of the front tire wheel well. Pull open wheel well cover so you can see DRL housing. Disconnect plug from DRL, connect factory connector you just disconnected to the DRL harness. Connect other side of DRL harness to DRL. Put back wheel well cover and screws.
|
Do those instructions pertain to the Inner Fender Panel removal on the Driver or Passenger side to replace this harness? Also do you have to replace the DRL Bulbs for this to work without burning out the Bulbs? Thanks for your response as I would like to install this DRL Harness tonight?