Quote:
Originally Posted by Indyblue98
What is the process for removing ... want to get just the piece on the drivers side dash by the piller. what are they held on by ?
Thanks
|
The dash trim on both sides are held in by clips, the driver side is only 2 clips
How I got mine out was I pulled the panel off like I was going to the fuse panel inside the car, if you look behind the dash trim you will see the silver clip what I did was squeezed the clip and pushed it forward and the 2nd clip came out with it fairly easy
I did the same thing on the other side with the 1st clip then used a flathead screw driver wrapped in a paper towel to pry the rest of the clips out
Hope that helps