Quote:
Originally Posted by Matt @ RX
Update!!!! Still tweaking the tune, but these cams are making peak power through 7200 rpm and not showing signs of dropping off. Were not spinning higher than that w/out looking into the valvetrain, but by the looks 8k redline.Stock cams peak power would start dropping off at 6300 and go down pretty steeply, but this is pretty damg impressive.
Rigght now were tied for peak HP as the base line, but we are just starting to get the tune dialed in.
Were down on low end TQ but that will come up.
 |
You'll have to change the lobe centers to get the peak down below redline.