[ADM PERFORMANCE]

Originally Posted by hognutz

this would be pretty easy to do electrically. I might do it that way eventually. The down side to the remote control relay if you wire to a constant power source there is some current drain and more of it in the on position. If you wire it to a switched power source then it will always be "wild" or flaps open at start up.

if I ever have to have my console out I am just putting a switch it. I did not want a switch in my trunk as the truck monkey would most likely play with it. For some reason I was feeling lazy and did not want to pull stuff up.

I have not traced out the whole circuit but if 12v closes the flaps you just want to tap in at that point with 12v and then maybe throw a diode in so you don't feed voltage back upsteam.

Dpdt relay....