Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Jarp · 10-13-2012, 05:18 PM

Most of the mule work has been done by Mick (Wildfire) on the JC forums. Who has pulled down his car twice now to fit cams and also did a lot of work on the original MACE IM spacers and the VCM/MACE LLT OTRCAI. Here is the cam development thread on Just Commodores - http://forums.justcommodores.com.au/...velopment.html

Oh obviously Steve (MACE) has been the Grand Poobah when it come to V6 aftermarket innovation in Oz and Vince at Trifecta has made this all possible through the tuning too.

10-13-2012, 05:18 PM	#612
Jarp Drives: Commodore SV6 Join Date: Jul 2010 Location: Australia Posts: 67	Most of the mule work has been done by Mick (Wildfire) on the JC forums. Who has pulled down his car twice now to fit cams and also did a lot of work on the original MACE IM spacers and the VCM/MACE LLT OTRCAI. Here is the cam development thread on Just Commodores - http://forums.justcommodores.com.au/...velopment.html Oh obviously Steve (MACE) has been the Grand Poobah when it come to V6 aftermarket innovation in Oz and Vince at Trifecta has made this all possible through the tuning too. Last edited by Jarp; 10-13-2012 at 05:43 PM.