|
I see, you have the non ba. Did not know that. In that case, the solid blue wire of the cable that contains the 9 smaller wires (speedwire cable) is the turn-on wire for the amp(s). Since this is the amp integration harness, it is assumed that you are also installing an amp to power the car's speakers. So you would hook up the included rca cables to the rca's on the harness and run all of it to the rear. The rca's will be the input signal for the amp. The 8 remaining wires of the speedwire connect to your 4 channel amp. Hook up power, ground and the remote-on wires and all the speakers in your non-ba car are now amplified.
|