Quote:
Originally Posted by metalmm785
Sorry to bring this back up but to what torque do the plenum cover bolts need to be tightened to? The IM was 18ft/lb but can't find/remember the plenum
|
18ft/lbs has been successfully used on the plenum cover but...
I snapped one oy my bolts when torquing to that level (it was a re-torque when installing a second time), and IMHO it may be more than necesssary for the 8 plenum cover bolts.
After that, I've been using 12ft/lbs without issue.
I also decided to do without the potential gains of the plenum spacer due to the height of the IM with my Mace 25mm. Just my preference (or laziness).