Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Started my L99 to LS3 conversion and new cam install today!...Photos and Videos

1Camaro2SS · 10-28-2012, 05:14 PM

I used a razor blade and scraped off the thick layer from the flat areas then I used scotch Brite pads along with sea foam but that dint work so well. I then used the pads with Scrubbing Bubbles (bathroom cleaner) to make the really clean. This was all done with piston at TDC and engine rotated on the side to avoid crap from going in the cylinder. I also used a shop vac and contantly vacuumed around the piston area.

10-28-2012, 05:14 PM	#37
1Camaro2SS Drives: 2013 Camaro ZL1 M6 Join Date: Sep 2010 Location: Grand Rapids, MI Posts: 1,445 View My Garage	I used a razor blade and scraped off the thick layer from the flat areas then I used scotch Brite pads along with sea foam but that dint work so well. I then used the pads with Scrubbing Bubbles (bathroom cleaner) to make the really clean. This was all done with piston at TDC and engine rotated on the side to avoid crap from going in the cylinder. I also used a shop vac and contantly vacuumed around the piston area. __________________ Last edited by 1Camaro2SS; 11-21-2012 at 11:02 PM.