Quote:
Originally Posted by gr8daneh
Can you post it for the rest of us? I will be wiring apparently next week. (Finally!)
|
Assuming you got the DIC "Y" wiring kit, basically the DIC diagram they gave me (at least) is to get the rear side markers to flash, so that's why this totally didn't make sense at all! Its the same principle for the front though, or mirrors in this case.
So it appears that the single Red wire should go to the White on the mirror (there is a separate pairing of White/Black wires - the Black needs to be grounded to another Black/Brown ground).The other end of the Red should connect to the positive of the front turn signal and the Orange goes to something in the door giving power; Ofer suggested a small connector that's for the interior lighting.
Now that all makes sense, what I can't figure out is how we are supposed to get to the front turn signals! This post, although helpful,
http://www.camaro5.com/forums/showthread.php?t=155660 seems to give half the info, I can't see where the wire comes out in the engine bay, maybe we need to remove the front wheel well liner. I didn't look yet. Hopefully someone else could chime in who' done this?!