Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

SRFnSNO · 06-13-2009, 03:07 PM

Installed Mine This morning.
I was suprised how much Road dirt I kicked up on the lower quarters and lower door pnls in 100 miles.

So a good wash down detial around the wheel wells and wheel well liner.
Wipe down with alachol wipes (or 50/50 alachol/water).
Kept car on the ground Front had to Turn wheels for each side; 1 hole needed to be drilled.
All rear holes were existing on rear flair.

There is 1 hole needed to be Drilled under each flair into the lower rocker.
Lucky the lower section is plastic. Taped hole with Scorpian Tiped Dry Wall screw in as Piolet hole for last 4 screws.

I know Pics. Will get some tomorow. Going on a Rally Run to CapMay NJ with a bunch of Porsche.

06-13-2009, 03:07 PM	#29
SRFnSNO Drives: Blown & Flamed Join Date: Feb 2009 Location: Jerzy Posts: 654 View My Garage	Installed Mine This morning. I was suprised how much Road dirt I kicked up on the lower quarters and lower door pnls in 100 miles. So a good wash down detial around the wheel wells and wheel well liner. Wipe down with alachol wipes (or 50/50 alachol/water). Kept car on the ground Front had to Turn wheels for each side; 1 hole needed to be drilled. All rear holes were existing on rear flair. There is 1 hole needed to be Drilled under each flair into the lower rocker. Lucky the lower section is plastic. Taped hole with Scorpian Tiped Dry Wall screw in as Piolet hole for last 4 screws. I know Pics. Will get some tomorow. Going on a Rally Run to CapMay NJ with a bunch of Porsche.