Quote:
Originally Posted by buelldude
The pan should fit in the back with no issues, if you have headers then some cutting will need to be done. The clips/screws go in easy and easy to figure out where they go. The front will need some work. I drilled bigger holes for the plastic nuts on the front end to go thru. If your wondering what I'm talking about just look under the car where the small air dam is and you will see the screws/nuts that hold the item on the front end.
|
So can you confirm that the holes for the 11 clips are already there? I suspect that '12s and later will have the holes, and '10/11s will have to drill them. Sort of like the strut bar holes in '11 and up models that aren't in the 2010s.