|
Did this myself... wasn't hard. Just cut the vinyl a tad larger than the emblem, carefully applied it to make sure there were no bubbles, then used a sharp razor following the grove between the crome and gold parts. Good Luck!
__________________
2SS/RS LS3 CGM/Black
2G1FT1EW3A9113560
1000, Dealer Order (4.06.09)
1100, Preliminary order accepted (04.09.09)
2000, Order accepted by GM (4.16.09)
3000, Order accepted by production control (4.21.09)
3100, Order available to sequence (5.14.09)
3300, Order scheduled for production (5.14.09)
3400, Order broadcast (5.21.09)
3800, Order produced (5.29.09)
4000, Available to ship (5.29.09)
4200, Shipped (5.29.09)
4800, Rail Ramp Unload (5.30.09)
5000, Delivered to the dealer (6.10.09)
6000, Delivered to the customer (6.11.09)
|