Quote:
Originally Posted by tramtwo
slide the engine over it'll move about a half inch... factory spec issue not a kooks problems.... this happens with other headers sometimes as well... dimple the header or move the engine.
|
Already moved the engine, didn't work. When you're supercharged you don't have a lot of play to work with there. The rubbing is lower on the column, not at the boot like most people.
And sorry, I'm not taking a hammer and banging out a $1500 set of headers because they fit poorly. They should work properly and not need to be smashed around. Excuses don't fly for Kooks on this one. At the very least, they should send me a new driver side header to reduce my down time.