Quote:
Originally Posted by 05SilverStreak
Pulling timing manually was something the guy at the shop threw out there. After looking into to that I dont really see a way other than tuning. No lift shifting. Im gonna let it spray through the shifts.
|
Tuning, or an external timing retarder that could be activated when you press your N2O button.
Be aware that if for some reason you bounce off the rev limiter between shifts, the engine will cut the amount of fuel via injectors, and a few other things. That lean condition would be very bad. And on top of that, you have a dry system. When I got my tune, I requested that spark be cut and not fuel. Also I have the LNC2000 timing retarder, which has an upper or lower rpm set point for cutting spark.
__________________
GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock
|