View Single Post
Old 05-10-2013, 09:52 PM   #102
SSMickey's Avatar
Drives: 2010 IBM 2SS
Join Date: Feb 2010
Location: Columbia S.C.
Posts: 1,434
Originally Posted by eclipsen View Post
Has it been confirmed that the stock 2010 SS axles will fit the 1LE diff?
It is a straight bolt in if you have stock axles. I believe 1LE axles will not work unless you change the hub. Also, if you use HP Tuners to change your gear ratio and it's a 2010, wait 10-15 minutes after you flash before powering the car up. If you don't, you'll most likely get an AC inop due to high engine temp code in your DIC. If you use EFI Live to flash, you shouldn't have any problems.
Vengeance Stage II Cam, Halltech CAI, RX Catch Can, Full ARH Exhaust, QTP Cutouts, Powerbond 25% Underdrive, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
SSMickey is offline   Reply With Quote