Hopefully the gasket is the issue but just a heads up while you are in there. I had a problem with the valley plate from edelbrock being defective. It was actually porous and oil was coming right through it. I dont know if they had this issue on any other models of eforce, or just the kit I have. Same symptoms as you can see in the thread I did on the problem. Oil puddling under the eforce and leaking down eventually.
http://forums.corvetteforum.com/c6-f...saga-ends.html
__________________
2007 C6 vert, auto, F55, LT3
LME LS402 , WCCH 245 Heads, Pat G. Custom cam
YSI / 3.0 pulley, ARH 1 7/8 headers, NPP
Dewitts / dual spals, A&A dual pump fuel system.
3.42 polished gears, hardened shafts, Alky control meth, Cartech line lock, ECS axle loops, Trans brace, 6L80 built by me.
ID 1000 injectors, comp rockers, Morel lifters, BT springs, Trend 3/8 pushrods, ATI 10% OD Damper
Circle D Triple Disc stall
1009 RWHP @ 7000, 817 RWTQ @ 6000,
|