Quote:
Originally Posted by realcanuk
Hopefully the gasket is the issue but just a heads up while you are in there. I had a problem with the valley plate from edelbrock being defective. It was actually porous and oil was coming right through it. I dont know if they had this issue on any other models of eforce, or just the kit I have. Same symptoms as you can see in the thread I did on the problem. Oil puddling under the eforce and leaking down eventually.
http://forums.corvetteforum.com/c6-f...saga-ends.html |
Holy Crap. That is exactly what mine is doing. I can't believe oil is coming through the plate. The gasket is probably only part of the problem. I will be calling Edelbrock again. Thanks
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|