Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Stainless Works · 06-19-2013, 09:53 AM

When Using a Stainless Works Cat-back on the Camaro it shouldn't be different from car to car. They are all 2010+ Camaros. Now what is different is the way they are installed. No two Installers use the same method or install exactly the same. So the system may take some time to get adjusted correct. When we do an install here at our shop the system is Tack Welded at every joint before leaving which allows for VERY minimal movement once in place. Once the Metal expands it may move a bit. If you can send me some pictures to Chris@Stainlessworks.net and i will be glad to take a look at the system and see if anything looks noticeably out of place.

Thanks, Chris
Chris@Stainlessworks.net
800-878-3635

06-19-2013, 09:53 AM	#27
Stainless Works Drives: Fast Join Date: Aug 2009 Location: Chagrin Falls, Ohio Posts: 183	When Using a Stainless Works Cat-back on the Camaro it shouldn't be different from car to car. They are all 2010+ Camaros. Now what is different is the way they are installed. No two Installers use the same method or install exactly the same. So the system may take some time to get adjusted correct. When we do an install here at our shop the system is Tack Welded at every joint before leaving which allows for VERY minimal movement once in place. Once the Metal expands it may move a bit. If you can send me some pictures to Chris@Stainlessworks.net and i will be glad to take a look at the system and see if anything looks noticeably out of place. Thanks, Chris Chris@Stainlessworks.net 800-878-3635 Last edited by Stainless Works; 06-19-2013 at 10:15 AM.