View Single Post
Old 06-21-2013, 08:54 PM   #16
old school chevy rodder
christianchevell's Avatar
Drives: 2013 2SS/RS Manual,DM exhaust,CRT
Join Date: Jul 2012
Location: Oregon
Posts: 4,764
Ambient lighting is just on the top edge of the door insert.......Cup holder and foot well lighting is a $550 option installed and its just a single LED to help see the pedals and floor in each side while you drive and a single led in each cup holder spot. I was underwhelmed at mine when it was installed and went on gen5diy to find the circuit to add lights so now I have lots of led under the dash but its connected to the door and dome lamp circuit and does not stay on unless the dome lamp is turned on which I also have a lot of red LED lights in. The under dash was simply done by splicing in a circuit and adding the self adhesive strips bought form my local parts store, the circuit is in the passenger side front kick panel under the dash...(not explained well on gen5diy....) but they do tell you the circuit so you can splice into the correct positive and negative.
2013 2SS/RS LS3 M6 ,CRT, NPP, Forged 428 ls3 stroker, GMPP ported heads, Katech chain, Mast windage, Cam Motion Cam, trunnion upgrade, Stainless Power headers HFC, CAI w/kit, Vmax PTD, Fluidampr25% udp, LPW diff cover, BMR strut brace,trailing arms, toes, bushings, Rocket racing wheels,Toyo Proxes 4+, elite catch can, clutch reservoir, dash/body LED, DRL rewire, Sparks billet badges, Forza 3way, tint, MRT louvers, ZL1 spoiler, MGW short throw, Monster dual LT1S clutch, bleeder, support, high vol pump, Speed hut shift light, ACC flames stripes, Driven ls30 oil, NGK TR6IX , Granatelli wires.
christianchevell is offline   Reply With Quote