View Single Post
Old 08-27-2013, 02:07 PM   #1
The Stig
knows 2 facts about ducks
The Stig's Avatar
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,271
MyLink Information for Developers

GM has opened the doors for third-party developers to create apps for MyLink.

For anyone who's interested in developing MyLink Apps (or any other reason you might want access to the core MyLink files cough*jailbreak MyLink*cough) here is where you can sign up for a free developer account:

I will be adding items to this list as I learn about them. Until then, this is all I've got.

Link to QNX (Company that created and owns the software behind MyLink):

Panasonic Links:




HTML5 Support 7_23_2012.pdf

Release Notes-GM Infotainment SDK v2.1.pdf

GMInfotainmentSDK - SupportList.pdf

How to Update Your MyLink Radio for New Apps

The BringGo/TuneIn/Siri Eyes Free bundle software update is an interim 2013MY production upgrade on 2013 Sonic and Spark models equipped with MyLink.

Sonic, Spark and Trax models with MyLink built before the production upgrade can be upgraded at the dealership.

Programming Information

Refer to #PI0914 for complete information about programming the MyLink radio with the new calibration.

In addition to the new BringGo/TuneIn/Siri Eyes Free bundle software update, it also addresses several MyLink radio conditions regarding a Service Rear Camera message, FM or XM radio station default, XM operation, and inoperative Bluetooth functions.

Programming Instructions

The latest calibrations for the radio are available on TIS2Web. Reprogram the radio following the Service Programming System (SPS) procedures in the appropriate Service Information.

Next, update the radio again, this time using a USB flash drive. It requires a USB 2.0 flash drive with a minimum capacity of 4 GB. In TIS2Web, select A11 Radio USB File Transfer – Programming from the Supported Controllers screen.

Any existing data on the USB flash drive will be erased during the TIS2Web-to-USB flash drive download process. Once the software is downloaded to the USB, do not add any data to the flash drive. The USB 2.0 flash drive should be a known good device with a light to confirm the device is reading/writing when attempting to access.

After all the files are downloaded to the USB flash drive, eject the device from the computer and insert the USB flash drive in the radio USB port.

TIP: If the message “The following update file is invalid SMD file” is displayed, follow the steps in #PI0914 to change the date and time to continue programming.

When the update info screen appears, select Update. (Fig. 5) The USB 2.0 flash drive must be installed into the vehicle before selecting “Update Info.” Do not remove the USB flash drive while the update is in progress.

Once the USB programming has been completed successfully and all the steps in the programming procedure are completed, verify that there are two new icons (BringGo and TuneIn) displayed on the smartphone link screen.

__MyLink Version History
23121110._______.E0.0D.0D.0D [I don't have this version in my version history]
22992942._______.E0.0D.0D.0D [I don't have this version in my version history]
22768311._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B)
22768303._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B)
22768304._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B)
22768305._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B)
22768306._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B)
Click to view my build thread

Last edited by The Stig; 09-24-2013 at 07:46 AM.
The Stig is offline   Reply With Quote