Notes for anyone wanting to fab something like this:
those tubes that lead to the valve bodies, make those shorter, but not so short the motors get too close to the header. This will get the outlets away from the frame rails.
Fab up a nozzle that faces the rear of the vehicle, as long as you dare, remember this tubing assembly is going to twist and vibrate, a lot!
This will get the exhaust away from the windows, almost.
The QTP unit I bought has a small 2 button remote (blue LEDs) the either fully opens or fully closes the valves (left button) or positions the valve in one of 100 increments! You can preprogram 2 settings. I'm looking for a setting for best low note and one for best performance. - a mute button for open headers, brilliant!
I'm picking up the microphone tomorrow, dyno wednesday
This is not my picture, but I love it, those are the outlets I want:
