View Single Post
Old 10-03-2013, 08:00 PM   #12
racerx8's Avatar
Drives: '18 SIM1SS1LE '16NRBZ06 '13BRM1LE
Join Date: Mar 2011
Location: MA
Posts: 58
Originally Posted by Big C CamaroSS View Post
This question is for racerx8 or Pete. Is this an install a certified (Hyundai) mechanic can do? My mechanic buddy did an outstanding job installing my Magnuson supercharger, but he had the step by step manual to guide him. Are there instructions on the Pedders website that I could print off that would guide him (us) installing the 1LE Permagrin pkg? The 32mm sway bar should be straight forward (hopefully).....I'm concerned with the bushings!

This is for Pete....I have the Pedders ZL1 27mm front & 32mm rear sway bars. What would adding the front sway bar do to the 1LE's handling?
Regarding the rear bushing R&R see my original post here, it's actually quite easy the way I did it. Refer to Pete's post on the front radius bushing R&R, loosely tight, then to spec tighten with suspension loaded (on the ground or lowered onto an alignment rack).
Good luck and enjoy the ride, Joe
racerx8 is offline   Reply With Quote