Quote:
Originally Posted by bkscott
Can't be sure from the Picture, but it looks like you lowered it using the spring seat which you are not supposed to do. That bottom lock is if for spring preload only. If I remeber correctly you adjust height by loosening the top lock and turning the shaft. If that make sense.
|
In my picture of the Coilover there a red mark in that ring which is the bigger ring I move that to adjust my lowering height but before that I have to loosen the lower ring before I adjust anything , but I did not mess with the spring seat , I did not do the install , I had a shop do it , hope this helps