View Single Post
Old 07-23-2009, 04:56 PM   #1
TeddyP25's Avatar
Drives: 2SS
Join Date: May 2009
Location: Fort Collins
Posts: 611
CGM stock to stroked..

From a stock 2SS/RS to a Stroker 418 Supercharged Camaro...hmm where to begin

Ground Effects, painted
Window tint
Custom bow ties
RPI floor/trunk mats

Pfadt- engine mounts, drop spings, sway bars, trailing arms
toe links, end links, diff bushings

Hawk performance pads, Stillen drilled/slotted rotors, braided brake lines

Engine/Drivetrain-.....built by Laramie GM Auto Center (Brian Trembly)
418 Stroker LS3
Callies 4" crank, 6.125 Compstar rods
CP Racing pistons 4080 -13.8 pistons
ARP 2000 bolts
JRE Blower Cam Kit
Edelbrock E-Force Supercharger 2.75 pulley
Custom valve cover with Scott plug wires
ADM Performance Street CAI(custom tube)
ZR-1 clutch
Custom clutch slave reservoir
BMR driveshaft loop
DSS level 5 output shafts
JRE posi kit
JRE fuel upgrade kit
LPE dual fuel pump with electric module
ARH 1 7/8 Headers
ARH Axelback exhaust
AIR custom tune...Clint

TSW Vairano 8.5/10x 20's
Nitto DR's

JL Audio Amp with Jl 10w6 Sub
Focal door and rear speakers
JL Audio Amp for deck speakers

Attached Images
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED built

Last edited by TeddyP25; 11-15-2010 at 03:28 PM. Reason: more mods
TeddyP25 is offline   Reply With Quote