Quote:
Originally Posted by skibik
My owners manual says I need the tool also but I successfully did it without it. It took me a few tries to figure it out. I added air until all the tires were somewhere around 40 PSI. Follow the relearn procedure that is posted in this thread for the 2010-2011. You let out air for 10 seconds then stop, now wait(it may take up to 30 seconds) until the horn beeps and that will tell you it registered then move to the next tire and repeat. When you get to the last tire you will get a single beep and a double beep telling you the relearn process has been completed. I went to fast through mine the first 2 times. The key is to let out 10 seconds of air and just stand around and wait until the horn beeps then move on.
Don't forget to reset all the tire pressures when done.
Dean.  |
just got winter tires....gotta try this!!