View Single Post
Old 12-16-2013, 09:06 AM   #4
COTW 9/16/13
kjkjr27's Avatar
Drives: 2011 2LT/RS Camaro IOM
Join Date: Jan 2012
Location: Syracuse
Posts: 10,097
Originally Posted by blazzin1 View Post
BK024 would be a great choice for you!!! And you're absolutely right, something is going on with Pedder's. I would be VERY leary about ordering anything from them.....if you ever want to see your parts!!! JMO!!!

But first off, just because you are changing sway bars, toe rods, and trailing arms does NOT mean you have to drop your cradle, none of those parts require the cradle to be lowered. Secondly, there is no need to lubricate the "full" Cradle Bushings....ever. There is little to no movement of any of the surfaces, so no lubrication is needed.

You might want to see if this guy still has these....seems like a good deal!!!

For some reason when installing toe rods some cars require the rear cradle to be lowered a little because the bolt on the driver side is blocked my the gas tank. I know on my car it is that way which is why I have held off on installing my pfadt toe rods, although I am not sure why some cars require it to be done while others don't.
kjkjr27 is offline   Reply With Quote