View Single Post
Old 12-29-2013, 10:01 PM   #24

wakespeak's Avatar
Drives: 2013 2SS LS3/NPP
Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,080
Hi guys just confirmed my 2013 FE4 SS has the 20941932 front cradle bushings. I can just see the part number from under the car on the exposed part of the bushing. I am thinking the rears are also the same as the track pack kit as well. The track pack must assume 2010-2011 FE3 as a starting point, which has the earlier bushing type. This makes sense as the shock mounts are not needed on the FE4 cars either...I am going to make a leap and say the FE6 front struts are the same "re-valved" FE4 units also.

I am just going to do the rear shocks and the sway bars on top of the FE4.

Edit: also did the rear toe links. These are definitely worth it for the improved spherical bearings at the joints instead of rubber. Made a surprising improvement in the handling. Zero defection. I used to be in the habit of timing a corner to allow for the rear end "to settle". Not needed now. I don't feel any rear end steer on hard acceleration anymore either.

Last edited by wakespeak; 06-10-2014 at 01:28 PM. Reason: Update
wakespeak is offline   Reply With Quote