Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

MLL67RSSS · 01-17-2014, 07:25 AM

The dash panel face is spot welded in place. So the short answer is no. The '67 and '68 are quite different so it would require cutting the old out and welding the new in.

'69 on top, '67 and '68 below, and an almost 67 stripped body shell.

01-17-2014, 07:25 AM	#2
MLL67RSSS Account Suspended Drives: car Join Date: May 2008 Location: location Posts: 1,569	The dash panel face is spot welded in place. So the short answer is no. The '67 and '68 are quite different so it would require cutting the old out and welding the new in. '69 on top, '67 and '68 below, and an almost 67 stripped body shell. Attached Images Last edited by MLL67RSSS; 01-17-2014 at 04:49 PM.