View Single Post
Old 01-18-2014, 12:01 PM   #1
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
HOW FAST CAN A BOLT ON ONLY GEN5 RUN THE 1/4 mile?? 11.45 @117.81

I've been on a mission this year to finally lay down a great all out pass that I knew my car would do. I called up Rhino (Mr L99) and asked him to look at a datalog and work his magic on my VVT tables. They had been previously set to stock. I told him what I thought the shift points should be, we bounced ideas back and forth and came up with a game plan. He sent me a tune file, and then off to ADM I went to test it out on the dyno. Immediately it picked up about 2hp and 2tq. Then Andy tweaked the A/F some and did some slight adjustments. The results were an additional 4hp and 4tq. 379.84hp and 403.45tq

So now i knew it was dialed and off to Baytown I went. It's a 5hour drive for me but my 1st pass I got in line early and kept all things perfect.
Car dead hooked with a best 1.53 60ft, it went straight down the track, and felt great! 11.45 @117.81 BOLT ONS ONLY WITH ALL STOCK INTERNALS! And -600 DA

The rest of the night again was littered with oildowns so I was unable to take advantage of the better air!

Camarojt is offline   Reply With Quote