Quote:
Originally Posted by TrackClub
Stock Z/28 vs stock ZL1 with optional recaros and rims/r-comps. The only mirror image would be the shoes.
|
Putting a set of R comps on the ZL1 does not set the cars up for a direct comparison to the Z/28. The Z/28 runs a square setup with 305/30/19s. The wheel and tire package lowers the Z/28 without changing the suspension geometry.
The Z/28 and ZL1 are very different cars from the weight to suspension to RWHP. The ZL1 is power dependent. The Z/28 is momentum dependent. The Z/28 brakes later, carries higher speed into the corners, mid-corner and exit speed. The Z/28 runs out of power on the straights. Drop a built LS7 into the Z/28 ad it will be amazing on the ring. I spoke with some GM people related to the project asking if they couldn't find a heads, cam and tune package in-house for the next run at the Ring...
You can add all the RWHP you want to either version of the Camaro Z. Anything over 630 at the rear wheels is unusable on a road course with a 305. The Z/28 is overbuilt for 505 at the crank. The weight, lower CG, brakes and aero on the Z/28 are a huge advantage to the Z/28. A pulley and tune get the ZL1 close to the ideal RWHP number, but weight, the location of the weight, and CG work against it.