[LS3 SS]

Originally Posted by TornadoSS

Just did my Pfadt solid bushings this afternoon. Had cradle out and new bushings installed and ready to reinstall in about 2.5 hrs. Little bit of cleaning tomorrow before reinstallation. Not really a bad job at all with the cradle completely out. And a sawzall is really handy...lol

FACK! How did the sawzall method go? I ended up using a cold chisel and hammer to separate the plastic casing from the subframe housing. It was my first time dropping the subframe and messing with the bushings, so hindsight is 20/20. We had the subframe back in the car in less than an hour...SMH.

It's all good. It was a really great feeling for me to be able to drop an entire subframe and put it back together without issue.