I have a 2010 1LT V-6 Camaro that I will soon be installing SS Brembo brakes on, and have a couple of questions for those of you Camaro owners who have done this install. The questions I have are regarding the bolts that are used to mount the flexible brake lines to the back side of the calipers. I will be using braided stainless lines for the install as well.
After shopping on Ebay and Amazon for the caliper brake line bolt kit for the SS calipers, they ALL show that the kit consists of two fine threaded, flanged, hex headed short bolts, as well as two hex headed guide pins. I am assuming that I will have to purchase two kits to install the SS calipers FRONT AND REAR as well.
My questions are as follows. Are the two short fine threaded hex headed bolts used to mount the flex lines to the back side of the calipers, and what are the guide pins that are included in the kit used for ?
Thanks In Advance For All Your Help.
All The Best,
Red 2010 Camaro