Quote:
Originally Posted by DevilDawgSS
has anyone installed the toggle switch in the engine compartment? If so, where did you install it, did you have to drill a hole, and if so what size bit? I got the black toggle that comes with the Oracle kits. Has three prongs - hot, ground, and the power terminal.
Also, need to confirm if the "ground" connector is to run a ground wire from the switch to a ground on the car, or to run the black wires from the strips to that connector.
|
I'm not sure that is a weatherproof switch. I wouldn't install it under the hood unless it was. The ground on the switch needs to be grounded on the car, it runs the LED that shows when you have the switch on. Your other wires could be ran to that also, but they all would still need to be grounded.