Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

RRTX-SS · 03-18-2014, 02:13 PM

i purchased some lsa heads so i will not be needing these anymore. They have roughly 35k on them the springs on them have close to 25k miles on them. The springs are PAC dual valve springs good to .650 lift. Nothing wrong with them just going with higher boost so i needed thicker deck heads. $700 shipped or $650 local pickup im located in tyler tx.

03-18-2014, 02:13 PM	#1
RRTX-SS Drives: 2010 2SS/RS M6 Join Date: Oct 2012 Location: East, Tx Posts: 239	F/S LS3 heads $700 shipped i purchased some lsa heads so i will not be needing these anymore. They have roughly 35k on them the springs on them have close to 25k miles on them. The springs are PAC dual valve springs good to .650 lift. Nothing wrong with them just going with higher boost so i needed thicker deck heads. $700 shipped or $650 local pickup im located in tyler tx. __________________ 2010 Camaro 2SS/RS 416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE 1995 Camaro Z28 LT1 M6 383 Fully Forged shortblock Last edited by RRTX-SS; 03-26-2014 at 10:58 PM. Reason: added price