Quote:
Originally Posted by big dave
Is there an easy way to remove the vacuum hose from the blower? Do you need fingers of a child to pinch that connector? My catch can is all mounted up but I can't get that hose off to save my life.
|
Just remember the little tab turn counterclockwise if your looking at the opening. I used a long screwdriver to slide the little tab down then pull. Its easier if you get the top one first then you can turn the whole thing so that the tab on the bottom hose is facing you. Then just push that tab down with the screwdriver and pull on the hose. Voila!!!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package.
744rwhp 727rwtq
|