Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

TornadoSS · 03-29-2014, 01:12 PM

Here's the harness installed. I used the factory points for the lap belts. The sub belt is bolted into the floor under the drivers seat with a plate available from RPM Rollbars. The shoulder harness bosses in the rollbar are threaded for 1/2" x 20 fine thread. 1" length should suffice.

03-29-2014, 01:12 PM	#131
TornadoSS WICKDSS Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010 Location: Wichita, Kansas Posts: 1,111 View My Garage	Here's the harness installed. I used the factory points for the lap belts. The sub belt is bolted into the floor under the drivers seat with a plate available from RPM Rollbars. The shoulder harness bosses in the rollbar are threaded for 1/2" x 20 fine thread. 1" length should suffice. __________________ 2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds.