Day two we had some issues, we started off with completing the heater hose relocation and found that there are no existing mounting holes in the 2010 frame to correctly mount the tab to the frame.
The heater hoses run behind the heat shield and the only real way to gain access is the remove the passenger side manifold or header which would allow you to remove heat shield and drill a hole for a self tapping body bolt. However for the time being I have to settle for the mounting tab into and existing hole and sandwiched between the frame and the heat shield. It's all pretty tight so I don't see it really going any place and it will have to do until I have the header off some day.
