|
cruise cancel button feature
So when you press the cruise button, at the base of the transistor you get 2.5V but on the collector side you dont have 0V? If thats the case, then either your transistor is not properly wired or its defective.
When the transistor receives a low current on the base side, he will let current pass between the collector and emitter sides, in this case letting gnd go to pin 85 of the relay then it should click and you will get 12v to pin 87.
Envoyé de mon iPhone avec Tapatalk
__________________
2010 2ss/rs Ls3, E-force s/c, 3.25'' pulley,Kooks long tubes w/cats, magnaflow 2.5" cat back, Rotofab cai, 65 lbs inj, MSD bap, AEM water/meth, comp cam, 621whp,577 wtq on mustang dyno
|