Quote:
Originally Posted by Can't_C_Me
Do this instead of spraying into the IM and doing the booster line step.
Open the top of the IM (which is straight foward) . Then grab a rag and MIST some Simple Green or Brake Cleaner on it and wipe any oil you see off with it. Then dry off the inside with a dry rag. Then gap the spray or liquid version of Seafoam and half the bottle evenly into each injector port. Seal the top back up (be careful and don't over tighten the bolts as they not supposed to be too tight) Let it sit for about 5-10min then started the car up. It may take 2 or 3 trys but it'll start. You may also get a CEL code which is normal also. Let the car run for maybe 1 or 2 min then drive it. I've done this so I'm not just making shit up.
If you don't feel comfortable with this just do it the way I wrote it up in the first post. Good luck
Sent from my Samsung Galaxy Note 3
|
May have to try this method, I have 41k miles on my car and I've yet to do a treatment on the valves. Thanks for the info.